Linksys Wireless Range Extender setup

 Linksys Wireless Range Extender setup

Linksys extender is a device that expands your network and is capable to maximize your speed.

Linksys Wireless Range Extender setup minimizes the installation cost to a third of your Wifi router.

With Linksys extender, you can get a reliable internet throughout your home or workplace. Now the question that should have to knock your mind, how to perform Linksys Wireless Range Extender setup. 

Linksys Wireless Range Extender setup can be performed using two methods.

• Manual method

• WPS button 

Now look at Linksys Wireless Range Extender setup requirements

To perform the Linksys Wireless Range Extender setup, the credentials are:

• The extender must be turned ON.

• Note the existing router’s wireless settings that is the network name, password, and wireless channel.

• Restore the factory default settings on your extender.

• You must access a stable internet connection.

So these were some necessary things to keep in mind before setting up the Linksys extender. 

• MANUAL METHOD

Let’s start:

Step 1:

Connectyour computer to the Ethernet port of an extender through an Ethernet cable.

Step 2: 

Now, plug the extender to the power outlet. Ensure that the LED lights are lit.

Step 3:

Next, to move forward with Linksys Wireless Range Extender setup, launch an internet browser and type router's IP Address that is "192.168.1.1".  

Step 4:

You will be prompted with a window that will ask for a username and password.  Leave the Username blank and enter “admin” as a password then, tap on Log In. 

Step 5:

Now, tap on Wireless > Basic Wireless Settings. 

Step 6:

Set the radio button to Manual and then key in the Network Name in the field given.  

Step 7:

On the Wireless Security section, select the security settings that will match your router’s configuration.

Now, enter the Passphrase and thenclick on Save Settings.

Step 8:

Finally, unplug the power cables of your home router and extender for around 30 seconds.

Plug the cable in router first. Wait for all the lights to be lit and then plug in the extender.

Congratulations!! Linksys Wireless Range Extendersetupmanually is successful.

Now through – WPS Method.

Through WPS Button

 Follow the instructions below for Linksys Wireless Range Extendersetup.

Let’s start:

• Insert your extender into an wall outlet.

• Hold the WPS button on your extender.

• Verify the WPS LED on the device as it determines the status of your Extender Setup network.

• If, the power LED on the extender become visible, then it means it is configuring with the router.

• After a few minutes, the LED will turn solid green.

• It determines that the Linksys Wireless Range Extender setup process is completed.

For More Detail visit on: linksysextendersetupinfo